Remote-controlled pool vacuum, 15 m cable as standard
A white robotic pool cleaner with blue handle and chassis, built in three parts: the cleaning unit, the power console and the control panel. The unit is computer-controlled, scrubs the floor and walls while the water is filtered continuously, and removes the need to drain and refill the pool after cleaning. The cable is 15 m as standard and can be built up to 30 m, which covers pools of roughly 1,000 m².
- Three-part system: cleaning unit, power console, control panel
- Floor, wall and waterline cleaned while the water is filtered
- Automatic, timed or manual cleaning from the remote
- 15 m cable as standard, up to 30 m for pools around 1,000 m²
- 29.8 V DC supply; host IPX8, power box IP23
- Caddy cart for moving and storage
What the machine actually does
Cleaning functions
The machine has three parts: the cleaning unit, the power console and the control panel. The unit is computer-controlled and brushes the floor and walls while the water is filtered continuously; in place of a full water change, the debris ends up in the filter bag.
- Automatic cleaning: switched on, the machine runs in automatic mode; using the remote moves it to manual control.
- Overall cleaning: floor, walls and water are handled in one pass, with dirt collected in the filter bag (70 μm by default, other ratings on request).
- Timed cleaning: set the cycle on the remote and the machine shuts down when the cycle ends.
- Manual cleaning: use the remote to clean a specific area straight away.
- Out-of-water protection: when the unit leaves the water, the impeller slows to a stop within one second.
- Stall protection: if debris slows the impeller, the machine stops.
Body and drive
- Three motors provide the climbing ability and the water spray capacity.
- The unit self-aligns vertically when climbing walls, and the floating cable is programmed to resist tangling.
- Wall and stair climbing with waterline scrubbing; a floor-only quick clean option is available for light debris.
- Suitable for all pool shapes and surfaces, with a multifunction digital control box and easy maintenance.
Cable and pool size
- Standard cable is 15 m, which suits pools of roughly 30–200 m².
- A 30 m cable can be built to order; it covers pools of about 1,000 m².
- Tell us the pool length and shape when ordering so the cable and cycle time are matched to the site.
Technical data
| Parameter | Robot Pool Cleaner |
|---|---|
| Model number | ROBO-PLUS |
| Material | Plastic |
| Origin | Mainland China |
| Debris handling | With filter bag |
| High-concerned chemical | None |
| Robot size (L×W×H) | 456 × 462 × 280 mm |
| Input voltage | 100–240 V |
| Output voltage | 29.8 V |
| Rated power | 200 W |
| Cycle time | 0.5 h / 1 h / 2 h |
| Cleaning range | 30–200 m² on the 15 m cable; about 1,000 m² on the 30 m cable |
| Floating cable | 15 m standard; 20 m and 25 m options, up to 30 m on request |
| Filter bag | Reusable bag with two filter grades; 70 μm fine grade available |
| Water flow | 18 m³/h |
| Moving speed | 15 m/min |
| Max climbing height | 180 cm |
| Waterproof rating | Host IPX8; power box IP23; remote control IP23 |
| Working temperature | 10 °C to 40 °C |
| Storage temperature | 0 °C to 40 °C |
| Packaging / net weight (robot) | 574 × 574 × 413 mm / 14 kg |
| Packaging / net weight (caddy) | 690 × 400 × 220 mm / 6 kg |
Technical data is indicative and may change with product revisions. Confirm the current datasheet before quoting a customer.
Other models to compare
View all
Not sure which model fits the site?
Send the lawn size, slope and access width, or the pool length, and we will narrow it to one or two models.